CIPTV2 – How to setup SRST with MGCP Fallback – Part 2

Ok so dial-peers… On the BR2/SRST router we need a dial-peer to match inbound calls from the PSTN:

BR2#sh run | section dial-peer
dial-peer voice 1 pots
 incoming called-number .
 direct-inward-dial
 port 0/0/0:15

When in SRST mode it looks something like this:

BR2#sh dial-peer voice summary
dial-peer hunt 0
AD                                    PRE PASS                OUT
TAG    TYPE  MIN  OPER PREFIX    DEST-PATTERN      FER THRU SESS-TARGET    STAT PORT
20005  pots  up   up             +442288224001$     0                           50/0/1
20006  pots  up   up             011442288224001$   0                           50/0/2
20007  pots  up   down                              0                           50/0/3
20008  pots  up   down                              0                           50/0/4
20009  pots  up   down                              0                           50/0/5
1      pots  up   up                                0                      down 0/0/0:15

At this stage calls are coming inbound to BR2 when in SRST mode all good!

Next post will be outbound calls..